ルーターを工場出荷状態に戻す方法についてまとめます。
RT1>en
Password:
RT1#write era
RT1#write erase
Erasing the nvram filesystem will remove all configuration files! Continue? [confirm]
[OK]
Erase of nvram: complete
%SYS-7-NV_BLOCK_INIT: Initialized the geometry of nvram
RT1#reload
Proceed with reload? [confirm]write eraseコマンドで、設定を削除します。
その後、reloadコマンドでルーターを再起動します。
[confirm]の部分では、そのままEnterキーを押します。
System Bootstrap, Version 15.1(4)M4, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2010 by cisco Systems, Inc.
Total memory size = 512 MB - On-board = 512 MB, DIMM0 = 0 MB
CISCO2901/K9 platform with 524288 Kbytes of main memory
Main memory is configured to 72/-1(On-board/DIMM0) bit mode with ECC disabled
Readonly ROMMON initialized
program load complete, entry point: 0x80803000, size: 0x1b340
program load complete, entry point: 0x80803000, size: 0x1b340
IOS Image Load Test
___________________
Digitally Signed Release Software
program load complete, entry point: 0x81000000, size: 0x3bcd3d8
Self decompressing the image :
########################################################################## [OK]
~~~
--- System Configuration Dialog ---
Would you like to enter the initial configuration dialog? [yes/no]:初期セットアップダイアログが表示されれば、工場出荷時の状態に戻っています。
コメント